146476

WCB elements are disc type, externally cooled units. They are designed to absorb and dissipate the thermal loads associated with the most severe clutch and brake applications. The WCB friction couple was developed specifically for continuous slip service and has a dynamic coefficient of friction that is greater than its static coefficient of friction. Also available, special high coefficient linings, which provide 50% higher torque than standard friction linings and provide a 1:1 dynamic to

Specifications

Size	448WCB
Dimension D₂₄	1.48 in 38 mm
Dimension D₂₅	2.70 in 69 mm
Dimension D₂₉	N/A
Dimension D₄₆	N/A
Dimension D₄₃	5.80 in 147 mm
Dimension G¹	56.50 in 1435.0 mm
Number of Bolt Holes H₃	16
Number of Bolt Holes H₃	1 3/8-6
Bolt Circle Diameter H₃²	58.688 in 1490.7 mm
Dimension H₁₀	25.19 in 640 mm
Dimension H₁₃³	N/A
Dimension J₁	23.00 in 584 mm
Dimension J₂³	57.09 in 1450 mm
Number H₄	3
Size H₄	3/4-10 in 3/4-10 mm
Bolt Circle H₄	24.500 in 622.3 mm
Single Piston Size	1-11.5
Piston Inlet Bolt Circle Diameter	41.500 in 1054.1 mm
Minimum Bore Size	11.250 in 286 mm
Maximum Bore Size	16.81 in 427 mm
Dimension D	37.70 in 780 mm
Dimension D₁	22.50 in 572 mm
Dimension D₂	31.36 in 797 mm
Number of Coolant Ports (O)⁴	16
Coolant Port Thread Size⁶	1 1/4 SAE ORB
Gear Part Number	416797
Dynamic Torque Rating⁷	2744000 lb-in @ 80 psi 310030 Nm @ 5.5 bar
Thermal Rating⁸	5200 hp 3878 kW
Water Flow⁹	520 gpm 19684 dm³/min
Maximum Slip Speed¹⁰	360 rpm
Maximum Freewheeling Speed¹¹	600
Housing (Weight)	7719 lb 3501 kg
Disc & Gear (Weight)	1445 3186
Disc & Gear (Inertia)	249.31 5916
Housing (Inertia)	24583 lb·ft² 1035.95 kg·m²
Water Volume	2800 in³ 45.9 dm³
Manufacturer	Eaton-Airflex
Actuation	Air Applied
Where Used	Drilling rigs Dynamometer Logging equipment Marine mooring systems Slip clutches Tension brakes Unwind stands
Features	Patented piston design Single or dual piston provides wider range of applied tension with greater control. Drop in powerhead package Standard single piston elements can be retrofitted with a dual piston powerhead to provide increased control. Split wear spacers The split wear spacers allow for wear adjustment without disassembly of the brake to minimize downtime and maintenance costs. Unique friction couple A specially formulated friction material, interfacing with a copper alloy surface, eliminates the stick-slip characteristic associated with ordinary frictional devices. Rapid heat dissipation The copper interface conducts heat rapidly to the circulating coolant. Open or closed loop coolant systems The element works equally well with open or closed loop circulating systems. On mobile equipment, the engine’s cooling system can be tapped to provide coolant to the element. Optional corrosion protection For marine environment applications, protective coatings are available to minimize corrosion.

Notes

1.00 in (25 mm) for 108WCB
1.38 in (35 mm) for 208WCB
0.857 in (4.8 mm) for 308WCB
Basic part number only. Order gear separately.

¹ Tolerance Sizes 8WCB thru 24WCB
+0.000/-0.003 (+0.00/-0.08)
36WCB +0.000/-0.005 (+0.00/-0.13)
48WCB +0.000/-0.005 (+0.00/-0.13)
² American National Standard for Unified Screw Threads
³ Tolerance +0.003/-0.000 in.(0.08/-0.00 mm)
⁴ Maximum diameter of “as cast” surfaces
⁵ American National Pipe Thread
⁶ American National Pipe Thread
⁷ Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10.3 bar).
⁸ Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10,3 bar).maximum allowable outlettemperatures are 150ºF (65ºC) for fresh water; 165ºF (74ºC) for 70/30 and 60/40 water glycol mixes; and 170ºF (77ºC) for 50/50 water glycol mixes.
⁹ To insure proper cooling, inlet port must be at the six o’clock position. Flow rates shown are for fresh water, flow rates for water glycol mixes must increase to achieve the ratings in the Thermal Rating column. Maximum allowable inlet pressure – 65 psi
¹⁰ Based upon a continuous slip velocity of 4500 fpm (22.9 mps).
¹¹ Maximum freewheeling velocity is 7500 fpm (38.1 mps).