COVID-19 Update - Clutch Engineering is open to support you.

Phone: 1-800-569-1291   Fax: 1-860-693-2197

Crane Control and Electrification

Clutch Engineering is equipped to provide for virtually all of your crane electrification needs.  Whether working with new or existing systems, our products are primed to create optimal solutions. We offer a variety of conductor bar and festoon systems, cable reels, and slip ring assemblies to address your needs. If you have any questions about electrification for cranes and other applications, contact our team directly.

1400 Series Cable Reel

Clutch Engineering offers Conductix-Wampfler's 1400 Series PowerReel spring-driven cable reels. These cable reels feature rugged all-steel construction for use in tougher conditions while maintaining their efficacy. These reliable cable reels are designed for long service life without extensive maintenance, if any. A ratchet mechanism locks the cable at the desired length and can also be disabled as needed. The reel may be mounted by bolting the base to any flat surface which is structurally sound enough to support it and the forces of winding and unwinding the cable.   Available cable length: 20 to 80 ft (6.1 to 24.38 m) Typical applications: Overhead hoists, truck cranes, extendable conveyors

1900-2400 Series Cable Reel

Conductix-Wampfler 1900 Series and 2400 Series PowerReel from Clutch Engineering are both spring-driven cable reels that are useful for various cranes and automated material handling. These cable wheel products are built to NEMA 4 standards for indoor or outdoor use, which gives you a greater variety of usage possibilities. The two-piece cable roller guide has a mounting range of 345 degrees. The cable reel's spring motor canister is sealed and lubricated for life. All 1900 & 2400 Series Cable Reels can be furnished with a pivot base to allow the reel to rotate and keep the extended cable perpendicular to the application. Typical applications: Overhead cranes and hoists, truck cranes, automated material handling

C-Rail Festoon System

Clutch Engineering offers Conductix-Wampfler C-Rail festoon systems for a variety of uses and environments. These systems can be made to survive in some of the most demanding of environments. Based on their advanced construction, they can be used indoors or outdoors. Special explosion-proof versions are available for additional durability. Tracks should be straight, or only partially curved. The festoon systems for C-rails are only used for project-specific requirements. The product has undergone hazard analysis and the construction and design are based on the latest technology. Max capacity per trolley: 275 lb (125 kg) Maximum speed: 393 ft/min (120 m/min) Typical applications: Overhead bridge cranes, hoisting devices, conveyor systems"

Heavy Load (HL) Cable Reel

Conductix-Wampfler motor driven reels cater to all kinds of applications, including the management of low voltage and high voltage cables or hoses. Conductix-Wampfler's Heavy Load (HL) Series motor-driven cable reel are corrosion-protected to stand up to the toughest environments. These cable reels are designed for 5 year or 15,000 hour operation before any maintenance is required. Installation on-site can be completed quickly and periodic maintenance is fast and easy. Clutch Engineering offers these cable reels to enhance your working environment and fulfill your power needs. Typical applications: Ship-to-shore (STS) cranes, rail mounted gantry (RMG) cranes, ship unloaders, stackers/reclaimers, shipbuilding cranes

Hevi-Bar II Conductor Bar

The Conductix-Wampfler Hevi-Bar II conductor bar uses surface area to dissipate heat. It can be mounted horizontally or vertically to function according to your needs in many instances. Conductix-Wampfler Hevi-Bar II conductor bar is available from Clutch Engineering and it is designed to last for the life of your equipment. Optional Dura-Coat finish provides protection in corrosive environments. (When mounting web brackets, take special care in aligning the brackets at precisely the same height as to assure level travel of the system.) Web brackets may be mounted by bolting the bracket to the support structure or by welding the bracket in place. Maximum speed: 2,000 ft/min (609.6 m/min) Typical applications: Medium to large overhead cranes, transit systems, steel mills, chemical plants

High Dynamic (HD) Cable Reel

Clutch Engineering offers Conductix-Wampfler High Dynamic (HD) Series motor-driven cable reels. These cable reels are comprised of very efficient components. Boasting a low starting inertia, their sophisticated speed and torque control is useful for highly dynamic operations. At container and bulk ports, steel mills, theaters, waste water treatment plants, and mines, Conductix-Wampfler motorized reels can handle many demanding requirements, even in harsher environmental conditions. Typical applications: Ship-to-shore (STS) cranes, rail mounted gantry (RMG) crane, rubber tired gantry (RTG) cranes, spreader reels

I-Beam Festoon System

Available from Clutch Engineering, Conductix-Wampfler I-Beam festoon systems can serve the needs of heavy cable and high-speed applications. These festoon systems are designed to perform in various tough environments. Trolleys are available for both flat and round cables. For higher-speed or heavy cable applications, Conductix is able to manufacture motorized cable trolleys. The use of a pre-assembled festoon system (with pre-attached cables on the cable trolley) will save a significant amount of time and money. The festoon system is built in accordance with recognized safety/technical regulations using the latest technology and has been checked for safety compliance by the manufacturer. Max capacity per trolley: 1,763 lb (800 kg) Maximum speed: 984 ft/min (300 m/min) Typical applications: Ladle cranes, conveyors, stacker cranes, container cranes

Insul 8 8-bar Conductor Bar

The Conductix-Wampfler Insul 8 8 Bar conductor bars can be bent to a tighter radius than most other systems and are quick and easy to install. Offered by Clutch Engineering, the Conductix-Wampfler Insul 8 8 Bar conductor bar is the original 8 bar system. Conductix-Wampfler 8-Bar is usually installed with bar profile oriented vertically and the collector shoe entering from the bottom. Installations that operate in a wet or dirty atmosphere or corrosive environment must be vertically mounted. Maximum speed: 900 ft/min (274.3 m/min) Typical applications: Small to medium overhead cranes, conveyors, monorails, hoists

RhinoReel Cable Reel

Clutch Engineering offers the Conductix Wampfler RhinoReel to meet some of the most demanding mill applications. This is a spring-driven cable wheel that uses linear springs rather than traditional clock springs. These features result in longer life and a smooth, linear torque curve. The linear torque curve creates the smoothest operating reel on the market, without any erratic motion. The life time lubricated ball screw and chain/sprocket drive system require no routine maintenance. This longer life translates to less machinery downtime and a lower cost of ownership. Typical applications: Magnet cranes, grapples, transfer cars

Safe-Lec 2 Conductor Bar

Clutch Engineering offers the rugged and easy to install Conductix-Wampfler Safe-Lec 2 conductor bar, for a variety of industrial uses. For this product, the collector arm is able to articulate through a wide range of motion to keep the shoe in contact with the rail. The shoes are guided by a v-contact in the bar itself. Safe-Lec 2 is insulated for IP2 ""finger safe"" operation. Maximum Recommended Hanger Spacing: 1.5 Meters (59.0”) on straight runways, 1.125 Meters (44.3”) on all Lateral Mount Systems and Curved Systems (curved section only) Maximum speed: 1,200 ft/min (365.7 m/min) Typical applications include: Small to medium overhead cranes, conveyor systems, monorails, amusement rides

Slip Ring Assemblies

These R-Series slip ring assemblies are easy to maintain, rugged, and built for long life. Clutch Engineering provides these Conductix-Wampfler slip ring assemblies as high-quality products that can be specifically customized to suit your application. These slip ring assemblies can be purchased with or without an included enclosure. Additionally, the brush carriage on a standard R-series slip ring assembly has drive holes in the outboard bearings. Special slip ring assemblies are available for hazardous duty, high voltage, high amperage, and other unique product applications. Typical applications: Generators, wind turbines, packaging machinery, cable reels, power shovels

Crane Control and Electrification Featured Manufacturers

  • Conductix-Wampfler


Get A Quote