146420

WCB elements are disc type, externally cooled units. They are designed to absorb and dissipate the thermal loads associated with the most severe clutch and brake applications. The WCB friction couple was developed specifically for continuous slip service and has a dynamic coefficient of friction that is greater than its static coefficient of friction. Also available, special high coefficient linings, which provide 50% higher torque than standard friction linings and provide a 1:1 dynamic to static torque ratio. Element construction and operation is illustrated. Pressurizing the cylinder causes the piston to clamp the friction disc between the water jackets. Heat generated at the friction interface is quickly transferred to the circulating coolant. Element sizes are indicated by the number of friction discs and the disc diameter in inches. For instance, size 224WCB has two (2) friction discs 24 inches in diameter.

Specifications

Size	314WCB
Dimenson D₂₄	0.91 in 23 mm
Dimenson D₂₅	1.41 in 36 mm
Dimenson D₂₉	0.250 in 6.4 mm
Dimenson D₄₆	N/A
Dimenson D₄₃	2.90 in 74 mm
Dimenson G¹	18.750 in 476.3 mm
Number of Bolt Holes H₃	8
Bolt Hole Size H₃	3/4-10 in 3/4-10 mm
Bolt Circle Diameter H₃²	17.000 in 431.8 mm
Dimension H₁₀	7.12 in 181 mm
Dimension H₁₃³	14.375 in 365.1 mm
Dimension J₁	6.00 in 152 mm
Dimension J₂⁴	18.94 in 481 mm
Number H₄	3
Size H₄	3/8-16 in 3/8-16 mm
Bolt Circle H₄	6.500 in 165.1 mm
Small Piston Inlet Thread Size O₂	1/2-14 in 1/2-14 mm
Large Piston Inlet Bolt Circle Diameter	13.25 in 337 mm
Small Piston Inlet Thread Size O₂	3/8-18 in 3/8-18 mm
Small Piston Inlet Bolt Circle Diameter	8.250 in 210 mm
Minimum Bore Size	2.25 in 57 mm
Maximum Bore Size	4.50 in 114 mm
Dimension D₁	16.25 in 413 mm
Dimension D₂	12.39 in 315 mm
Number of Coolant Ports O⁵	8
Coolant Port Thread Size⁶	1/2-14 NTP
Gear Part Number	416303
Dynamic Torque Rating⁷	64500 lb-in @ 80 psi 7288 Nm @ 5.5 bar
Dynamic Torque Rating – Large Piston Only	5446 Nm @ 5.5 bar
Dynamic Torque Rating – Small Piston Only	1842 Nm @ 5.5 bar
Thermal Rating⁸	180 hp 134.4 kW
Water Flow⁹	18 gpm 68.4 dm³/min
Maximum Slip Speed¹⁰	1260 rpm
Maximum Free Wheeling Speed¹¹	2100
Housing Weight	366 lb 166 kg
Disc Gear Weight	14164
Housing Inertia	102 lb·ft² 4.3 kg·m²
Disc Gear Inertia	0.8219.5
Water Volume	120 in³ 2.0 dm³
Manufacturer	Eaton-Airflex
Actuation	Air Applied
Where Used	Drilling rigs Dynamometer Logging equipment Marine mooring systems Slip clutches Tension brakes Unwind stands
Features	Patented piston design Single or dual piston provides wider range of applied tension with greater control. Drop in powerhead package Standard single piston elements can be retrofitted with a dual piston powerhead to provide increased control. Split wear spacers The split wear spacers allow for wear adjustment without disassembly of the brake to minimize downtime and maintenance costs. Unique friction couple A specially formulated friction material, interfacing with a copper alloy surface, eliminates the stick-slip characteristic associated with ordinary frictional devices. Rapid heat dissipation The copper interface conducts heat rapidly to the circulating coolant. Open or closed loop coolant systems The element works equally well with open or closed loop circulating systems. On mobile equipment, the engine’s cooling system can be tapped to provide coolant to the element. Optional corrosion protection For marine environment applications, protective coatings are available to minimize corrosion

Notes

1.96 in (50 mm) for 148WCB
1.75 in (44 mm) for 248WCB
1.75 in (44 mm) for 348WCB
1.75 in (44 mm) for 448WCB
Basic part number only.Order gear separately.
Some high torque applications of three or four disc elements require additional torsonial support on the cylinder end of the unit. Contact your Airflex representative for more details.

¹ Tolerance Sizes 8WCB thru 24WCB
+0.000/-0.003 (+0.00/-0.08)
36WCB +0.000/-0.005 (+0.00/-0.13)
48WCB +0.000/-0.005 (+0.00/-0.13)
² American National Standard for Unified Screw Threads
³ Tolerance +0.003/-0.000 in.(0.08/-0.00 mm)
⁴ Maximum diameter of “as cast” surfaces
⁵ American National Pipe Thread
⁶ American National Pipe Thread
⁷ Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10.3 bar).
⁸ Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10,3 bar).maximum allowable outlettemperatures are 150ºF (65ºC) for fresh water; 165ºF (74ºC) for 70/30 and 60/40 water glycol mixes; and 170ºF (77ºC) for 50/50 water glycol mixes.
⁹ To insure proper cooling, inlet port must be at the six o’clock position. Flow rates shown are for fresh water, flow rates for water glycol mixes must increase to achieve the ratings in the Thermal Rating column. Maximum allowable inlet pressure – 65 psi
¹⁰ Based upon a continuous slip velocity of 4500 fpm (22.9 mps).
¹¹ Maximum freewheeling velocity is 7500 fpm (38.1 mps).