6-607-005-003-0000

Hydro-sheave couplings are mounted to the motor shaft end and provide minimal overhung loads for parallel (belt-driven) shaft applications. The smaller sizes (7-12.4) are installed very quickly and easily utilizing a slotted collet in which no drilling or tapping is required. The slotted collet is finished bored to fit standard NEMA B motor shaft dimensions. The larger sizes (15-24) are installed with a center locating bolt that does require drilling and tapping to ensure proper mounting. The Model HSD Fluid Coupling consists of a basic fluid coupling, input and output group, and a standard customer supplied QD type sheave. The sheave is mount ed on a coupling that has been installed on the end of a driveshaft.

Specifications

Size	7.0
Bore Size	1-1/8 in
Dimension A	7.81 in
Dimension B	3.67 in
Dimension C	7.05 in
Dimension D	0.56 in
Dimension Q	2.149 in
Dimension R	0.84 in
Dimension S	1.15 in
Dimension T	2.54 in
Dimension U	2.687 in
Dimension V	1/2-20 in
Dimension X	2.00 in
Dimension J	N/A
Dimension W	N/A
Dimension B ₁	N/A
Maximum C	N/A
Dimension C ₁	N/A
Dimension E	N/A
Dimension F	N/A
Dimension G	N/A
Nr. H	N/A
H Diameter	N/A
Dimension I	N/A
Dimension K	N/A
Dimension L	N/A
Dimension M	N/A
Dimension N	N/A
Q.D. Hub Size	SD
Weight (Less Oil)	12.75
Key	1/4
Maximum Speed	3600 rpm
Center Capscrew Torque	38 to 42 lb ft
Casting on Housing	216262 A\|216405 A
Less Oil Weight	N/A
Maximum Oil Volume	gal
Tolerance	Dimension D up to 2 inch: +0.001/-0.000from 2 to 4 inch: +0.0015/-0.000 Dimension W up to 0.500 inch: +0.002/-0.000from 0.625 to 1 inch: +0.003/-0.000
Manufacturer	Wichita Clutch

Notes

Do not use Eaton QD sheaves.
Bolt pattern is not the same.